Size and clearance
We confirm width, depth, and height, and check swing space for doors and drawers. For tight rooms, a slightly shallower cabinet or a different door swing can make the vanity feel easier to use.
Bathroom Vanities · Regina
Bathroom Vanities Regina
Upgrade storage, counter space, and daily usability with a vanity that fits your room and installs cleanly, with tidy plumbing connections and a finished look.
On-Site Measurements
Clean Installation
Written Scope
Better Fit and Function
Vanity replacements that look right and work right
If you're searching for bathroom vanities Regina homeowners can count on, you're usually looking for more than a cabinet. The vanity is the daily-use work zone: it sets the sink height, controls storage, and dictates how the plumbing, mirror, lighting, and backsplash all line up.
Regina Bathroom Renovations installs bathroom vanities with an emphasis on fit and finish. That means confirming rough-in locations before we order or set a unit, planning for door and drawer clearance, and leaving you with solid mounting, tight supply and drain connections, and clean edges where countertop meets wall and floor.
A new vanity is also one of the fastest ways to refresh a bathroom without changing the whole layout. When the room otherwise works, swapping the vanity can improve organization, reduce clutter around the sink, and update style in a single, contained project.
Vanity Planning
What we help you choose (so it fits the space and your routine)
The right vanity coordinates cabinet size, sink placement, storage, faucet configuration, and moisture-ready materials.
Single vs. double sink
We'll talk through how the bathroom is used, whether a double sink truly improves morning traffic, and what it means for storage, countertop space, and plumbing.
Countertop and sink type
Common options include integrated tops, undermount sinks, and vessel sinks. The right choice depends on cleaning preferences, splash control, and how much counter edge you want around the basin.
Faucet compatibility
We match the faucet configuration to the top: single-hole, widespread, or centerset. We also confirm spout reach and handle clearance so the faucet feels natural at the sink.
Storage layout
Drawers, tip-out trays, and interior organizers matter as much as the exterior style. We help you plan what goes where so the space stays functional after the first week.
Moisture-ready materials
Bathrooms see humidity swings, so we discuss cabinet construction, finishes, and edge protection that hold up around sinks and near the tub or shower.
Installation Preparation
Clean installs: what we check before the vanity goes in
A vanity can look perfect in a showroom and still be a headache at install if the room isn't measured and prepped correctly. Before removal or install day, we verify:
- Plumbing rough-ins: Drain height and location, hot and cold supply positions, shutoff accessibility, and space for the P-trap.
- Wall conditions: Stud placement for secure mounting, out-of-plumb corners that affect countertop fit, and any drywall repair needed after the old unit comes out.
- Flooring and base details: Whether the new vanity sits on finished flooring, how toe-kicks and baseboard returns will be handled, and how edges will be sealed.
- Electrical and lighting: Whether outlets, vanity lights, or mirror placement need small adjustments for the new width or sink position.
If your vanity replacement is part of a bigger plan, a full bathroom renovation in Regina often bundles vanity, flooring, and fixture updates so everything aligns visually and functionally. If you only need the vanity, we keep the scope tight and the work focused on a strong, finished result.
From Measure to Finish
Our bathroom vanity process
A measured sequence keeps the cabinet, countertop, fixtures, plumbing, and finish details coordinated.
01
Measure and confirm constraints
We measure the room, note door swings and tight corners, and confirm plumbing and wall structure so the vanity you choose can actually be installed without compromises.
02
Select the vanity, top, and fixtures
We help you narrow sizes, storage styles, and countertop/sink options, then confirm faucet hole layout and any matching accessories you want to coordinate.
03
Remove the old vanity and prep the area
We protect nearby finishes, disconnect plumbing, remove the existing unit, and address minor wall or floor touch-ups that would otherwise show after the new vanity is set.
04
Install, level, and secure
We set the vanity, level it properly, anchor it securely, and install the countertop and sink as required for the product you chose.
05
Book Your Free Inspection
Reconnect plumbing and finish details
We reconnect supply and drain, test for leaks, and complete finishing touches like caulking at the backsplash and around penetrations so the install looks intentional.
Planning Your Investment
How Much Do Bathroom Vanities Cost in Regina?
Most bathroom vanity projects in Regina typically range from about $900 to $4,500+, depending on vanity size, countertop type, sink and faucet selection, and whether plumbing locations stay put. A straightforward like-for-like swap with a stock vanity and integrated top often lands at the lower end, while larger custom cabinetry, stone tops, double sinks, and fixture upgrades push the total higher.
Final pricing depends on measurements, wall and floor condition after removal, access for bringing the unit in, and any required adjustments to shutoffs, drain height, or electrical placement. The exact cost is confirmed after an on-site review and a written scope.
Vanity Inspiration
Bathroom vanity styles we install
Customer Proof
Homeowners notice the fit and finishing details
“We replaced a dated vanity and didn't want to open up the whole bathroom. The measurements were spot on, the new cabinet sits level, and the plumbing reconnection was tidy. The room looks finished instead of patched together.”
“Our new vanity has drawers instead of a big empty cabinet, which has made a bigger difference than we expected. The countertop and faucet lined up perfectly and everything was sealed cleanly at the wall.”
Practical Answers
Bathroom vanities Regina homeowners ask about
Can you replace a vanity without changing the plumbing location?
Yes. A like-for-like vanity replacement usually keeps the drain and supplies where they are, as long as the new cabinet's sink position and interior clearance work with the existing rough-in. We confirm measurements first so you don't end up with a drawer or shelf that blocks the trap or shutoffs.
How long does a bathroom vanity installation take?
Most vanity replacements can be completed in a day once materials are on site and the scope is straightforward. Timelines can extend if the old unit leaves wall damage to repair, if the countertop has special handling, or if plumbing or electrical needs small updates for the new vanity width and mirror placement.
Should I choose a floating vanity or a floor-standing vanity?
Choose a floating vanity if you want easier floor cleaning and a lighter look, and if the wall can support proper mounting. Choose a floor-standing vanity when you want maximum cabinet volume and a simpler install on uneven floors, especially in older bathrooms where walls may not be perfectly straight.
What is the most common reason a new vanity doesn't fit properly?
The most common issues are rough-in placement and real-world wall conditions: out-of-square corners, baseboard returns, and supply/drain locations that don't line up with drawers or shelves. We avoid these problems by measuring the room, checking stud placement, and confirming how the chosen cabinet is built inside.
Can you install a vanity top that requires an undermount sink?
Yes. Undermount sinks require the right countertop material and proper mounting and sealing, plus accurate cutouts and faucet hole spacing. We verify compatibility between the cabinet, top, sink, and faucet so the finished assembly looks clean and drains correctly.
Do I need to replace my mirror and lighting when I replace the vanity?
Not always, but it's worth checking proportions. A wider or taller vanity can make an existing mirror look undersized, and a new faucet height can change how light hits the sink area. Many homeowners do a vanity swap first, then decide if mirror and lighting updates are needed for balance and usability.
Ready to update your bathroom vanity?
Share a few measurements and what you want to improve, and we'll recommend vanity options that fit your room and confirm a clear, written scope before any work starts.